KTM 990 Adventure Repair Manual page 35

2
1
3
5
7
9
2
2
4
6
6
8
bk
– Disconnect the electric connections from the fan motor and the
temperature switch .
1
– Drain the cooling liquid from the radiator and engine: see
Chapter 12.
– Detach the water hoses from the radiator (special pliers
600.29.057.100) and unscrew the radiator
NOTE: fan and radiator shield do not need to be dismounted from the
radiator.
– Pull off the oil lines from the oil tank to the valve covers
return line (special pliers 600.29.57.100), unscrew the oil lines
4
from the oil terminal and pull out. Remove the O-rings.
5
– Loosen the fixing bolts
6
carefully pull out the oil line.
– Disconnect the side stand switch
cable clips.
– Loosen the two bolts and the nut
– Unscrew the clutch slave cylinder
the locking pin out of the pushrod.
– Dismount the chain roller and chain securing guide.
.
2
on the oil tank, remove the oil tank and
and take the cable out of the
7
and remove the side stand.
8
and the chainguard
9
3-4
and the
3
and pull
bk