Table of Contents
Advertisement
5
4
7
9
bk
2
1
3
6
8
bl
– Take off the positive starter cable cover
starter engine cable
and draw out the wiring harness.
2
– Detach connector
on the starter relay.
3
– Unscrew the ground connection
– Pull off the cover
from the positive terminal, unscrew the nut
5
beneath it and remove the lines from the stud.
– Pull the battery cable with the lock
– Loosen the bolts on the side support
pull out the bolt and remove support together with the battery case.
NOTE: When removing the lateral supports with the battery box, ensure
that the lines of the locks are not pinched.
– Use the trolley jack to position the attachment 600.29.055.100 on
the engine, insert the bolt
and fasten with the nut.
– Remove the retaining pin
pin
.
bk
– Detach the return spring of the brake lever.
– Remove the bolt
and tilt the foot brake pedal to the side.
bl
. Unscrew the positive
1
.
4
from the holder.
6
and the nut on the bolt
7
through the front of the engine bracket
9
by removing the lock on the retaining
bk
3-16
,
8
Advertisement
Table of Contents
Troubleshooting
