KTM 990 Adventure Repair Manual page 127

A
2
1
3
– Push the double timing gear down into the chain tunnel draw the
timing chain along the side on the inside.
– Use the wire hook to lift the side of the chain on the inside over
A
the gear teeth onto the chain teeth
1
Hold the double timing gear towards the outside by inserting your
finger through the hole in the bearing bolt.
– Mount and grease a new O-ring on the bearing bolt
timing gear.
– Lift the double timing gear, insert the bearing bolt on the double
timing gear and the needle bearing into the cylinder head and
tighten to 30 Nm.
6-14
of the double timing gear.
2
of the double
3