Step 4B: Connecting The Inputs And Outputs (Channels 2 To 4) - Siemens SITRANS F Operating Instructions Manual

Connecting

5.11 Step 4b: Connecting the inputs and outputs (channels 2 to 4)

3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.
5. Connect wires to terminals using wiring tool.
6. Tighten cable gland.
Note
Active or passive current output is preselected at ordering.
Note
Load
Current output (channel 1): < 500 Ω (HART ≥ 230 Ω)
5.11 Step 4b: Connecting the inputs and outputs (channels 2 to 4)
1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
64
5
4
Active current output
⑤ C
④ Ca+
Active current output
Cp-
C
Ca+
+
-
Passive current output
U
0
6
5
Passive current output
⑥ Cp-
⑤ C
Cp-
C
Ca+
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
+ -