Table of Contents
Advertisement
2.2
Transducer Cable, Cable for External KP (option)
If the external KP is not to be connected, do only the applicable procedures in sections 2.2.1 and
2.2.2.
The KP from an echo sounder or sonar can be connected to this network fish finder to synchronize
transmission (to prevent interference). Use the optional Connector Kit for TX Sync (Type, OP02-
86, Code No. 001-205-780) and cable MPYC-4 (or MPYC-2) for the connection. (The MPYC-4 is
a Japan Industrial Standard (JIS) cable. If not available locally, see the Appendix 2 for the equiv-
alent cable.)
Name
Upset UI Screw-B
Super Gland
PH Connector Assembly
Cable Clamping Plate
Rainproofing Panel KP
EMI Core
Crimp-on Lug
2.2.1
How to process the cables
Note: The label on the transducer cable can be removed if it interferes with treatment of the cable.
How to process the transducer cable
CM265LH
6
B265LH
Put unused wires (3)
in vinyl tubing (local
supply) for insulation.
Connector kit for TX sync
Type
M4×20
MGB20M-12B
02-1097 (4P)
02-167-1528
02-167-1529
GRFC-10
NCW-1.25
Approx. 100
Braided shield
Extract cores from here and cut inclusion.
Taping
20
Extract braided shield and wrap it around sheath.
(This part lies in cable clamp.)
Approx. 100
Extract cores from here and
cut inner materials.
Code No.
000-163-756-10
000-177-248-10
001-206-000
100-379-090-10
100-379-100-10
000-177-010-10
000-157-213-10
Sheath
Wind shield around cable.
(This part lies in cable clamp.)
20
Vinyl tape (one turn)
7
2. WIRING
Qty
2
1
1
1
1
1
4
Advertisement
Table of Contents
