Func Key; How To Use The Func Key; How To Change The Function; Position Data - Furuno FCV-288 Operator's Manual

1.16

FUNC Key

The FUNC key provides for one-touch call up
of desired function setting window. 8 items
are available: picture advance, shift, interfer-
ence, clutter, color erase, white line, white
marker, and TVG.
1.16.1 How to use the FUNC
key
1. Short-press the FUNC key to open the
setting window programmed; for exam-
ple, the [Pic. Advance] setting window.
[Pic. Advance] setting window
2. Use the FUNC key,
setting and press the ENTER key.
1.16.2 How to change the func-
tion
1. Press and hold down the FUNC key to
show the [FUNC Key] menu.
2. Select a function and press the ENTER
key.
or to select a
13
1.17

Position Data

To output the position data, follow the proce-
dure below.
1. Press the MARK key. The cross cursor
appears on the screen.
Depth and water temperature at cursor
position
Guide for how to output
the position data
MANUAL L:2.0/H:2.0 LF
36.8ft 50.0°F
/ / / : Move cursor
[ENTER] / [MARK] : Set
[MENU] : Cancel
Position entry window
Cross Cursor
36.8
ft
Cross cursor
Note: If there is no position data the mes-
sage "No position data!" appears. Check
the navigator.
2. Press the TrackPad to set the cross cur-
sor where desired.
3. Press the MARK key again to output the
position.
1. OPERATION
LF L:AF x1
0
0.0
20
40
60