Installation And Removal Of The Dustproof Cover - Mitsubishi Q2ACPU User Manual

19. LOADING AND INSTALLATION

19.6 Installation and Removal of the Dustproof Cover

When using the A52B, A55B or A58B, attach the dustproof cover supplied with the
extention base unit to the I/O module on the left end.If no dustproof cover is attached,
foreign matter will enter the I/O module, causing a failure.
Procedures for installing and removing the dustproof cover are described below.
(1)
Insert the dustproof cover into the connector or terminal-side groove of the I/O module first
as shown in the figure, and then push the dustproof cover.
Installation
19 - 15