Mitsubishi Q2ACPU User Manual page 533

APPENDICES
Error Code
Error
(Hexadecimal)
4060
H
4061
H
4062
H
4063
H
Online
4064
H
registration
error
4065
H
4066
H
4067
H
4068
H
4069
H
406A
H
Ladder
4070
H
verification
Error Contents
The CPU module system area for
registering monitor conditions is
being used by another device.
Communications failed.
Another device is monitoring using
the detailed condition for
monitoring.
The number of registrations for file
lock is greater than 16.
Incorrect setting contents.
Device I/O information differs from
parameters.
A keyword that differs from the
one set for the designated drive
memory was specified.
The designated monitor file has
not been secured.
The designated command cannot
be registered or cancelled since it
is in execution.
Condition has already satisfied at
device.
Drive other than No.1 to 3 has
been designated.
The program before modification
differs from the registered
program.
Message Displayed
at Peripheral Device
Alert (1) is displayed.
Not registered.
Alert (1) is displayed.
Cannot access files.
Setting is incorrect.
Does not match the
parameter.
Keyword doesn't match.
File capacity is not enough.
Unable to execute due to on
going process.
Setting is incorrect.
Drive specification is incorrect.
Program does not match.
App - 136
Corrective Action
When monitoring of the other
device has completed, perform
the monitoring again.
Or increase the system area of the
buil-in RAM using a format with an
option.
Re-perform communications.
Do not use the detailed condition
for monitoring from the designated
device.
Or cancel the monitoring detailed
condition for other device and
perform the monitoring again.
Reduce the number of
registrations to 16 or less.
Check the set contents.
Check the parameters.
Or check the data.
Check the designated keyword.
Secure the monitor file, then
perform monitoring.
Re-perform the command after
requests from other devices has
been completed.
Check the monitor condition.
Or perform monitor registration
again and then monitor.
Check the designated drive and
specifies a correct drive.
Check the registered program and
match the program to it.