Mitsubishi Q2ACPU User Manual page 100

8. DEBUGGING FUNCTION
(3)
2) When "1. [ ] Device" is set Either
"1. ( ) Word Device" or "2. ( ) Bit Device" can be set.
When "1. ( ) Word Device" is set
The monitor stop timing is such that monitoring stops when the present
value of the designated word device attains the designated value.
The following shows the method for designating the current value.
For decimal (word) designation
For hexadecimal (word) designation : [H
For decimal (double word) designation : [K
For hexadecimal (double word)
designation
For real number designation
When "2. ( ) Bit Device" is designated
The monitor stop timing is such that monitoring stops when the execution
status of the designated bit device becomes the designated status.
The following shows the possible designations for execution status.
At leading edge :
At trailing edge :
In the case of devices for which index qualifications have been made, the index
qualified value is monitored.
The following shows an example of this type of monitoring.
: [K
: [H
: [E
8 - 8
Decimal number
Hexadecimal number
Decimal number Space
Hexadecimal number Space
Real number
]
]
L]
L]
]