Mitsubishi Q2ACPU User Manual page 241

13. PARAMETER LIST
Default value
–
X 8k points
Y 8k points
M 8k points
L 8k points
B 8k points
F 2k points
Fixed to X (8k points), Y (8k points), S (8k points), SB
SB 2k points
(2k points), SW (2k points).
Up to 32k points per device within a range of 28.8k
V 2k points
words, including the above points
S 8k points
However, the total for bit devices is 64k points.
T 2k points
ST 0k point
C 1k point
D 12k points
W 8k points
SW 2k points
No setting
No setting
No setting
–
200ms
No setting
No setting
Checked
Stop
No setting
Displayed
Not displayed
Not displayed
Stored in built-in RAM
No setting
Setting
Setting range
–
1 range only for each device
1 range only for each device
1 range only for each device
–
10ms to 2000ms (in 10ms units)
10ms to 2000ms (in 10ms units)
10ms to 2000ms (in 10ms units)
Error checked
Stop/Continue
5ms to 2000ms (in 5ms units)
Displayed/Not displayed
Displayed/Not displayed
Displayed/Not displayed
Stored in built-in RAM/specified history file
1ms to 2000ms (in 1ms units)
13 - 4
Reference Section/Reference Manual
–
QnACPU Programming Manual (Fundamentals)
Section 10.3
Section 10.3
QnACPU Programming Manual (Fundamentals)
-–
Section 9.2
Section 12.1.1
Section 12.1.3
Section 9.3
Section 9.3
Section 10.2
Section 9.9.2
Section 9.4
QnACPU Programming Manual (Fundamentals)