Mitsubishi Q2ACPU User Manual page 95

8. DEBUGGING FUNCTION
(b) When "2. ( ) Condition" is set
"1. [ ] Device" and "2. [ ] Step #" can be set.
1) When only "2. [ ] Step #" is set
The monitor data collection timing is the moment when a QnACPU shows
designated status immediately before executing the designated step.
The following shows the possible designations to execute.
When switching from OFF to ON:
When switching from ON to OFF:
All the time only during ON
All the time only during OFF
All the time in any statuses
8 - 3
:< >
:< >
:< ON >
:<OFF >
:<Always>