Mitsubishi Q2ACPU User Manual page 442

APPENDICES
AJ71ID -R4 control
instruction
AJ71QC24 control instruction
Classification
ID controller initial setting
Data read from ID data carrier
Data write to ID data carrier
Continuous read from ID data carrier
Continuous write to ID data carrier
Data compare with ID data carrier
Same data batch write to ID data carrier
Copy between ID data carriers
ID data carrier clear
ID data carrier use end
ID data carrier use start
Writes the user registration frame to the
2
E PROM for the AJ71QC24N.
Reads the user registration frame from the
2
E PROM for the AJ71QC24N.
Data send with the dedicated protocol using
the "on demand" function
Data send for the specified number of bytes in
no-protocol mode
Data send in accordance with the send
schedule table in no-protocol mode
Data receive in no-protocol mode
*
Data send with the bi-directional protocol
Data receive with the bi-directional protocol
Communication status read
Device read from other stations
Device write to other stations
Data send to other stations
Data receive from other stations
Transient transmission request to other
stations
* The AJ71QC24N can be used with QnA link instructions designated for use with special
function modules (G(P). ***).
Function
App - 45
Instruction Symbol
IDINIT1, IDINIT2
IDRD1, IDRD2
IDWD1, IDWD2
IDARD1, IDARD2
IDAWD1, IDAWD2
IDCMP1, IDCMP2
IDFILL1, IDFILL2
IDCOPY1, IDCOPY2
IDCLR1, IDCLR2
IDOFF1, IDOFF2
IDON1, IDON2
PUTE
GETE
ONDEMAND
OUTPUT
PRR
INPUT
BIDOUT
BIDIN
SPBUSY
READ
SWRITE
SEND
RECV
REQ