Installation And Removal Of Protective Cover - Mitsubishi aj65sbt-rps User Manual

4.6 Installation and removal of protective cover

A protective cover can be installed on the front surface of the AJ65SBT-
RPS/RPG module to prevent foreign matter from entering the terminal blocks.
The protective cover applicable to the AJ65SBT-RPS/RPG module is specified
below.
Procure it as necessary.
Item
Protective
cover
To dismount and mount the protective cover on and from the AJ65SBT-
RPS/RPG module, follow the steps below.
(1) Mounting
With the upper section of the protective cover hooked to the upper end
section of the module, press the lower section of the cover until you hear it
click.
(2) Dismounting
With the finger applied to the lower section of the protective cover, raise the
cover upward.
Type
Cover for prevention of entry of foreign matter
A6CVR-8
into terminal blocks (sold in batches of 10).
Description
21
Remarks
Optional
Click