Precautions When Configuring The System - Mitsubishi Q2ACPU User Manual

3. SYSTEM CONFIGURATION
3.3.2

Precautions when configuring the system

The following shows the hardware and software packages which can be used for
QnACPU.
(1)
REMARK
Hardware
(a) The number of modules that can be mounted is restricted depending on the
module type.
Applicable Module Dedicated to QnACPU
I/O module
Special function module
Intelligent special
function module
Interrupt module
Link module
Total 4 for network,
Ethernet use
Ethernet module
The modules described above are categorized as follows.
1) I/O module............................... Standard input modules and output modules
2) Special function module.......... Special function modules that perform processing
3) Intelligent special function......
module
4) Interrupt module...................... Modules that issue interrupts to the QnACPU
5) Link module............................. Special function modules for MELSECNET II, /B
6) Ethernet module...................... Dedicated Ethernet interface modules for
For ACPU
No restrictions
–
No restrictions No restrictions
No restrictions Total 6 modules
Only 1 module
–
Total 2 for data link use
in accordance with FROM/TO instructions from the
QnACPU (for example: A68AD, A62DA, etc.)
Special function modules that can process not only
by executing FROM/TO instruction of QnACPU but
also by accessing QnACPU from special function
module (Example: AJ71UC24, AJ71QC24N, etc.)
(AI61)
data links and MELSECNET/10 networks.
(Example: AJ71AP21, AJ71QLP21, etc.)
QnACPU (AJ71QE71, AJ71QE71-B5)
3 - 21
Remark
–
–
Including GOT-A900
Series
(Only when the bus
connection is used.),
and GOT1000 Series
(Only when the bus
connection is used.)
–
Total 4 for network,
Ethernet and data link
use