Mitsubishi Q2ACPU User Manual page 26

2. OVERVIEW
(b) The user can standardize and simplify programs by creating and using macro
instructions corresponding to functions.
(c) Devices can be used without restrictions.
1) Word device bit operations are possible.
2) Differential contacts can be used.
3) Buffer memories of special function modules can be accessed directly from a
program as devices.
4) The link data of network modules can be accessed directly from a program as
devices.
(d) Ease of operation for GPP function program editing has been improved.
1) Up to four programs, data, etc., can be edited simultaneously.
Programs and data can be cut and pasted between edited objects.
2) Ladder editing is possible while the ladder is displayed with comments.
3) Familiar operations can be performed with pull-down menus and dialog
boxes.
(e) The debugging function at start-up has been perfected.
1) Ladder modification while performing monitoring is possible.
2) Coil ON/OFF causes can be searched for.
3) The timing for monitoring can be set using a step number or device status,
allowing debugging to be conducted under the optimum conditions.
4) Devices for which index qualifications have been set can be monitored.
(f) The GPP function document creation function has been strengthened.
1) Since comments can now comprise 32 characters, they can be more detailed
than before.
2) Comments can now be set for all devices.
3) The statements and notes appended to programs can now be managed as
an integral part of the program, which makes program modifications and
utilization easier.
4) Printout data can be saved in a file.
2 - 3