Table of Contents
Advertisement
7.
AUTO REFRESH FUNCTION
I/O number setting
of the CC-Link
module for the
specified module
number
CC-Link module
type setting for
the specified unit
number
Device setting of
QnACPU used
(c) Move the cursor to the module number position for auto refresh setting and
press the
key (Detail). The "CC-Link setting" screen appears.
F3
Select "4. Auxiliary setting...." and "5. Station information setting...." to set
detailed data.
[CC-Link setting]
1. Module starting I/O No.
[ ]
2. Module type 1. (*) M. Master station
2. ( ) L. Local station
3 Batch refresh device
Remote input(RX)
Remote output(RY)
Remote register(RWr)
Remote register(RWw)
Special link relay(SB)
Special link register(SW) Device [
Execute(Y)
When pressing the Execute (Y) or the
screen of CC-Link setting list.
Label name:
Auxiliary setting....
4.
5. Station information
setting....
Device [
]
Device [
]
Device [
]
Device [
]
Device [
]
]
Cancel(N)
Spase:Select Esc:Close
Esc
7 - 13
Remote station
setting connected to
CC-Link module
(Refer to 1).)
Setting of each remote
station (Refer to 2).)
key , the screen returns to the
Advertisement
Table of Contents
Troubleshooting
