Mitsubishi Q2ACPU User Manual page 244

13. PARAMETER LIST
Item
MELSECNET/MINI setting
Number of master modules
Master module head
I/O No.
Model name & number
of stations
Receive data
batch refresh
Send data
batch refresh
Retry count for
communication errors
MELSECNET/
MINI
FROM/TO instruction
detailed settings
access priority
Receive data clear
at communication error
Faulty station detection
bit data
Error No.
MINI link operation
when CPU stopped
Circuit error check
Supplementary settings
Program setting
Boot file setting
SFC
SFC program start mode
Start condition
Output mode when the block is stopped
Acknowledge XY assignment
Parameter No.
Make the settings for automatic refresh of the MELSECNET/MINI
–
system.
6000 Set the number of MELSECNET/MINI master modules to be used.
H
Make the detailed setting required for automatic refresh of the
600N *
H
MELSECNET/MINI system.
Perform various settings required when multiple programs are
used.
7000 Set programs to be executed among multiple programs.
H
Set the file for boot operation and other settings.
–
8002
H
Perform various settings required for SFC programs.
8003
H
8005
H
Allows confirmation of the settings made in I/O assignment.
–
This setting does not affect CPU module operation.
* N means the number of the master module counting from the first. (N: 1 to 8)
13 - 7
Description