Mitsubishi Q2ACPU User Manual page 43

3. SYSTEM CONFIGURATION
Product Name Model Name
A68DAV
A68DAI-S1
A62DA
A62DA-S1
D/A
converter
module
A616DAI
A616DAV
Memory
AD59
card,
Centronics
interface
AD59-S1
module
Voice output
A11VC
module
AJ71QLP21
AJ71QLP21G
AJ71QLP21S
AJ71QBR11
Network AJ71QLR21
module
AJ72QLP25
AJ72QLP25G
AJ72QBR15
AJ72QLR25
Description
0 to 10V, analog output, 8 channels.
0 to 20mA, analog output, 8 channels.
4 to 20mA/0 to 10V
Analog output 12 bits, 2 channels
4 to 20mA/0 to 10V Analog output,
2 channels
4 to 20mA. Resolution: 1/4000
Analog output, 16 channels
0 to 10 V/0 to 5 V. Resolution: 1/4000
Analog output, 16 channels
32k byte-memory battery backup
Can be connected to printer conforming to
Centronics standards
Messages can be recorded and played back on
a maximum of 60 channels.
The following recording times can be selected
for each channel: 1 second, 2 seconds,
4 seconds, 8 seconds.
The total recording time is 64 seconds
For MELSECNET/10 optical loop networks
(compatible with SI cable)
For MELSECNET/10 optical loop network
(compatible with GI cable)
For MELSECNET/10 optical loop networks.
Network backup by external power supply
For MELSECNET/10 coaxial bus networks
For MELSECNET/10 coaxial loop network
For MELSECNET/10 optical loop network
remote I/O stations (compatible with SI cable)
For MELSECNET/10 optical loop network
remote I/O station (compatible with GI cable)
For MELSECNET/10 coaxial bus network
remote I/O stations
For MELSECNET/10 coaxial loop network
remote I/O station
Number of Occupied
Points (points)
[I/O Allocation
Module Type]
32 (special 32 points)
32 (special 32 points)
32 (special 32 points)
32 (special 32 points)
32 (special 32 points)
32 (special 32 points)
16 (special 16 points)
32 (special 32 points)
32 (special 32 points)
32 (special 32 points)
–
–
3 - 12
Current Consumption
Remark
5VDC(A) 24VDC(A)
0.15 0.5
0.15 0.4
0.6 0.35
15VDC (A68P)
+0.53A
is
0.3 –
-0.125A
required.
15VDC (A68P)
+0.2A
0.38 –
is
-0.17A
required.
0.3
–
0.35A when
0.32 connected to
AD59MEF.
0.6 0.38
• For Use with
QnACPU
0.65 –
Only
• Maximum 4
modules can
be used for
0.65 0.2
one CPU
module.
0.8
(Refer to
–
Section 3.3.2 )
1.14
0.8 –
0.9
–
1.3