18.
MEMORY CARDS AND BATTERIES
18.5 Part Names of Memory Card
Part names of the memory card are shown below.
No.
(1) Connector
(2) Battery holder
(3) Battery holder locking switch
(4) Write protect switch
Name
Connects the memory card to the CPU module.
Holds a lithium battery that is used to backup RAM data.
Locks the battery holder to the memory card.
(Locked in "LOCK" position.)
Enables or disables writing to the memory.Factory-set to OFF.
ON : Data writing disabled
OFF : Data writing enabled
*
Must be set before writing a program and starting operation.
18 - 6
Description
Remark
*
*