Mitsubishi Q2ACPU User Manual page 145

8. DEBUGGING FUNCTION
3) "Trigger Point"
Set the point at which the trigger is executed. Select one of the following:
Upon execution of
each instruction
At Request of PDI : When operating trigger using the peripheral devices
Specify Detail
Condition
The following shows the setting device under the detailed condition.
Bit device
Word device
The following qualifications are possible with respect to the devices listed
above.
Digit designation for bit devices
Bit number designation for word devices
POINT
The trace execution time, program name, step and branch factor are automatically
added to the trace results.
: When executing PTRA instruction
capable of GPP function.
: Set a device and step number.
The following shows setting examples: The details
on how to make the settings and trigger execution
timing are the same as described in Section 8.2
Monitor condition setup in Monitor function.
: X, FX, Y, FY, M, L, F, SM, V, B, SB, T (Contact), ST
(Contact), C (Contact), J \X, J \Y, J \B, J \SB, BL \S
: T (Current value), ST (Current value), C (Current value), D,
SD, FD, W, SW, R, Z, ZR, U \G, J \W, J \SW
8 - 53