Get Atm Addresses At Port; Stc: Get Atm Addresses At Port - 3Com CoreBuilder 9000 User Manual

Get ATM Addresses at
Port
Port ATM address: Network prefix
number
-------- -------------------------------------- -------------------- ------ ---
< 2.1.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. *
< 4.1.2> 39.89.0*. *. *. *. *. *. *. *. *. *. *
Get the manual ATM addresses at a specific port.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 2 4 0.0
The following information is displayed:
UME Parameters
Table 19 describes the parameters displayed by the command.
Table 19 Parameters
Name Description
Port Number ATM port number <slot.group.port>.
ATM address - Network prefix of ATM address.
Network prefix
ATM address - User part of ATM address.
User part
ATM Addresses Port Table
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup

(4) STC: Get ATM Addresses at Port

Format or Range
<slot.group.port> (0.0 for all ports)
3 4 2 4
The manual ATM addresses at the specified port or all
ports are displayed.
Information is displayed as shown in the example.
ATM address:user_part member man
*. *. *. *. *. *. *
*. *. *. *. *. *. *
143
number
21101 YES
41201 YES