Corebuilder 9000 Atm Enterprise Switch Integrated Fast Setup - 3Com CoreBuilder 9000 User Manual

3
CoreBuilder 9000
ATM Enterprise
Switch Integrated
Fast Setup
I
NTEGRATED
This chapter describes how to use the Integrated Fast Setup procedure to
configure the CoreBuilder
function in the network.
After you have physically connected the CoreBuilder 9000 ATM
Enterprise Switch to your site network devices and power has been
applied, you must set some parameters to enable the CoreBuilder 9000
ATM Enterprise Switch with its attached ATM Interface Modules to
function in the network.
The CoreBuilder 9000 ATM Enterprise Switch local management software
features an Integrated Fast Setup procedure that configures the
CoreBuilder 9000 ATM Enterprise Switch in one continuous process.
With Integrated Fast Setup, you can set up the most important system
parameters that you need to start working right away. The remaining
parameters are assigned default values.
If you are installing the ATM Switch Fabric Module and ATM Interface
Modules at the same time, you need to perform the Integrated Fast Setup
procedure only once; all modules will be configured.
F S
AST ETUP
® 9000 ATM Enterprise Switch, allowing it to