Reset Nni Configuration - 3Com CoreBuilder 9000 User Manual

Reset NNI Reset the NNI configuration parameters for the CoreBuilder 9000 ATM
Enterprise Switch to their factory default settings. The default setting is
Configuration
UNI for all ports, and 7 for maximum number of hops.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following prompt is displayed:
Do you really want to reset config? [y/n]
Enter y to confirm. The following message is displayed:
NNI configuration was set to defaults.
The NNI configuration parameters are reset to UNI for all ports.
(1) SET: Switch Setup
(3) NNI: NNI Setup
1 1 3 5
The NNI configuration parameters are reset to their
factory default values.
NNI configuration was set to defaults.
1 1 3 5
Setting the Port Network Connection Type
(5) NNI: Set NNI configuration to
factory defaults
85