Administering Port Addresses - 3Com LANPLEX 6000 User Manual

13-12 C 13: A
HAPTER
Administering
Port Addresses
Listing Addresses
Top-Level Menu
system
display
ethernet
summary
mode
fddi
detail list
ipFragmentation
tokenring
multicastLimit add
ipxSnapTranslation
bridge
stpState remove
trFddiMode
ip
stpCost find
addressThreshold
snmp
stpPriority flushAll
agingTime
analyzer
srRingNumber flushDynamic
stpState
script
freeze
address
stpPriority
logout
stpMaxAge
stpHelloTime
stpForwardDelay
srBridgeNumber
port
packetFilter
B P
DMINISTERING RIDGE ORTS
You can administer the MAC addresses of stations connected to Ethernet
and FDDI ports on the LANplex system.
You can display MAC addresses currently associated with the selected ports.
Each address type (static or dynamic), assigned port, and age are also listed.
To list currently defined MAC addresses:
1 From the top level of the Administration Console, enter:
bridge port address list
You are prompted for slot number(s).
2 Enter the number(s) of the slot(s) or
You are prompted for the port type.
3 Enter
Ethernet
You are prompted for the port number(s).
4 Enter the number(s) of the port(s) or
the ports you selected.
An example of an address list follows.
Addresses for
Ethernet address
08-00-20-1d-67-e2
00-80-3e-02-68-00
00-20-af-29-7b-74
08-00-02-05-91-c1
00-80-3e-02-6d-00
00-80-3e-08-5f-00
00-80-3e-00-3d-00
all
, , , or
FDDI tokenring
all
Ethernet port 1:
slot 8,
Type
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
.
.
all
to display all MAC addresses for
Age (secs.)
219
219
219
219
219
219
219