Release Pvc; Rep: Release Pvc Call - 3Com CoreBuilder 9000 User Manual

Release PVC

Release a specified PVC. PVCs must be manually released. When a P2M
PVC is released, all additional destination connections are also released.
You cannot release SVCs with this menu.
In a P2M (point-to-multi-point call), this option releases all of its branches
that belong to the call number that you enter.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Call number
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
A PVC with call number 10 was released.
(4) S&C: Setup of Connections and ATM
Format or Range
Inteiger. See (3)CON\(2)\(1) CLL to get Call
number for a port.
3 4 1 1 5 [parameters]
The PVC with the specified call number is released.
A PVC with call number <n> was
released.
3 4 1 1 5 10
Create Permanent Virtual Channel (PVC)
Addresses
(1) PVC: PVCs Setup
(1) GET: Display VPI/VCI Limits

(5) REP: Release PVC call

175