Display Elan Parameters In Lecs Database; Lep: Display Elan Type & Params - 3Com CoreBuilder 9000 User Manual

Display ELAN
Parameters in LECS
Database
Display the ELAN type and maximum frame size for a specified ELAN. The
information is taken from the LECS database. For information about
parameters in the LES database, see "Display ELAN Parameters in LES
Database" on page 278.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN name
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 5 2 elan_73_9
The following information is displayed:
elan_type = 802.3
LECS ELAN Database Operations
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS network topology
(2) LEP: Display ELAN type & params
Format or Range
Up to 32 characters. (For more information, see
"Display ELANs" on page 245.)
2 1 5 2 [parameters]
The ELAN type and parameters are displayed as shown
in Table 30.
Information is displayed as shown in the example.
max_f_size = 1516
247