Display Redundant Elans Specific Information; Rlg: Display Redundant Elans Specific Info - 3Com CoreBuilder 9000 User Manual

270
C 9: M
HAPTER ANAGING
Display Redundant
ELANs Specific
Information
LAN E
MULATION
Display specific information about Redundant ELANs.
Command Actions
Enter menu sequence:
Direct access sequence:
Enter a parameter at the prompt
Parameter
Redundant ELAN id
Command Result
System action taken:
System message display:
Example
Enter:
2 1 5 9 5 0
The following information is displayed:
ELAN name
ELAN status
ELAN state
State start time (Sec)
Number config requests O.K
Number config requests failed : 0
PRIMARY LES Id
SECONDARY LES Id : 1
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS Network topology
(9) RDN: LE Service redundancy
(5) RLG: Display Redundant ELANs
2 1 5 9 5 [parameter]
Format or Range
The internal ELAN id number. (For more information,
see "Display Redundant ELANs General Information"
on page 268.)
The specific redundant ELAN information is displayed.
Information is displayed as shown in the example.
: elan1
: Operational
: PRIMARY
: 1122
: 0
: 0
specific info