Configuring Security At Port Level - 3Com OfficeConnect 3C16710 User Manual

16710.bk : MANAGING.FRM Page 29 Tuesday, October 7, 1997 11:38 AM

Configuring Security at Port Level

To configure security for a port:
From the View menu, select Zoom In to display the
1
representation of the hub.
Double-click on the port for which you want to
2
configure security.
Quick Config Manager displays the Port
Configuration dialog box.
In the Port Configuration dialog box, select the
3
Security category.
Quick Config Manager displays the Port Security
Configuration panel , as shown in Figure 4-12 .
In the Port Security Configuration panel at port level:
Authorized Addresses Shows the following:
No. of Addresses — Displays the number of
addresses that can be authorized for this port.
The list above it shows any addresses already
configured for this port.
Figure 4-12 Port Security Configuration Panel
Hub Security 4-29