Nni Hops Setup; Display Maximum Nni Hops; Gmd: Nni Get Maximum Number Of Hops - 3Com CoreBuilder 9000 User Manual

NNI Hops Setup

Display Maximum
NNI Hops
The following commands allow you to configure the NNI hops parameter:

Display Maximum NNI Hops

Update Maximum NNI Hops
For more information about hops, see "Hop Limit — Avoiding loops" on
page 370.
Display the maximum number of hops permissible for NNI routing. This
parameter limits the number of times a setup message can be transferred
between switches on NNI connections in search of a destination, thereby
avoiding an infinite loop.
Command Actions
Enter the menu sequence: (1) SYS: Platform configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 1
The following message is displayed:
NNI max hops: 7
The actual number of hops is max_hops+1.
(1) SET: Switch setup
(3) NNI: NNI setup
(1) GMD: NNI Get maximum number of
hops
1 1 3 1
The maximum number of hops permissible for NNI
routing is displayed.
NNI max hops: <n>
NNI Hops Setup 181