Display Lecs Access Options - 3Com CoreBuilder 9000 User Manual

126 C 6: M
HAPTER ANAGING
Display LECS Access
Options
N I
ETWORK NTERFACES
Display the current communication channel between LEC and LECS for
the specified port of the CoreBuilder 9000 ATM Enterprise Switch. The
LECS-via-ILMI parameter determines whether the LEC that is attached to
the port connects to the LECS by ILMI or by the well-known address.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 3 1 3.1.2
The following message is displayed:
LECS via ILMI is ENABLED.
(1) SET: Switch Setup
(8) IME: ILMI Setup
(3) MIB: ILMI MIB View Setup
(1) GET: Get LECS via ILMI
ON/OFF Status
Format or Range
<slot.group.port>
1 1 8 3 1 [parameters]
The LECS-via-ILMI status for the specified port is
displayed.
LECS via ILMI is <ENABLED/DISABLED>.