Ap Package Upgrade - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select the
<Access Points> menu in the sub-menus. To create an outdoor AP, click <Add>, select
<3rd Party Outdoor AP>, enter AP PROFILE NAME, MAC ADDRESS, and IP
ADDRESS, and then select <Apply>.
4.2.7

AP Package Upgrade

Configuration using CLI (Upgrade Function)
To manage the AP upgrade function, execute the command as follows:
1) Go to configure  AP configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap ap_1
2) Request the image file of an AP to upgrade.
WEC8500/configure/ap ap_1# upgrade-request weafama_1.2.4.R.bin
WARNING: AP will be upgrade.
Are you sure you want to continue? (y/n) : y
WEC8500/configure/ap ap_1#
3) To check the upgrade file information of the requested AP, use the following command.
WEC8500/configure/ap ap_1# show ap upgrade list
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
/* Pri
AP_ID Model
1 WEA302i 1.2.4.R/ 1.2.4.R
Samsung Electronics America
Figure 85. Outdoor AP Create Window
: VersionPriority (MD-model,A-AP config)
Version(config/current) Status(RC/FR/RC)
Success( 0/ 0/146) AP
Version 5.2
Pri force
No
page 177 of 533