Figure 170. Managed/Neighbor Ap Search/Configuration Window - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
7) If you click Add in the [Managed/Neighbor AP] tab, operator can go to the Managed/
Neighbor AP list addition screen and can add a Managed/Neighbor AP list.
Operator can also delete it by using Delete.

[Managed/Neighbor AP] tab main screen

Managed/Neighbor AP list addition screen
8.2.1.9 Station Allow Limit
The WIDS counts the number of frames and number of authentication failures to
distinguish a station that generates too many management frames in a network or that is
continuously failed for authentication. A threshold value is defined for the count and a
station is recognized as an unauthorized station if the count exceeds the threshold.
Configuration using CLI
1) Go to the configure  wi  device  client configuration mode.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device# client
WEC8500/configure/wi/device/client#
Samsung Electronics America

Figure 170. Managed/Neighbor AP Search/Configuration Window

Figure 171. Managed/Neighbor AP List Addition Window
Version 5.2
page 341 of 533