Figure 121. 802.11A/B/G/N Radio (1) - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
11) Configure the bandwidth of the AP. Bandwidth can be configured only for 80211a/n/ac.

bandwidth [BANDWIDTH] ap [AP_ID]: Bandwidth is configured for a specific AP.

bandwidth [BANDWIDTH] global: Bandwidth is configured for all APs.
Parameter
BANDWIDTH
AP_ID
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  <802.11a/n> or <802.11b/g/n> menu in the sub-menus.
An example of selecting 802.11a/n is shown below.
The configuration items are as follows:
[AP Service Configuration]

SERVICE: Enable or disable the radio service.
[Channel Configuration]

CURRENT CHANNEL: Configures a channel.
 Range for 80211a: 36-165
 Range for 80211bg: 1-14

CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by the automatic adjustment function such as RRM. When selecting the <Monitor>
 <Access Points>  <Radio>  <802.11a/n/ac> or <802.11b/g/n> menu, the
channel value is displayed as *. (Optional)
Samsung Electronics America
- 20: 20 MHz
- 40: 40 MHz
- 80: 80 MHz
- 160: 160 MHz (to be supported in the future)
- 8080: 80 + 80 MHz (to be supported in the future)
ID of the AP (range: 1-3000)

Figure 121. 802.11a/b/g/n radio (1)

Description
Version 5.2
page 238 of 533