WEC8500/8050 Operation Manual
4) Enable the WLAN.
APC/configure/wlan 1# enable
5) To check the configured connection limitation, use the 'show wlan detail' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio> <802.11a/n> or <802.11b/g/n> <General> menu in the sub-menus.
After configuring MAXIMUM CONNECTIONS, click the <Apply> button.
Samsung Electronics America
Figure 145. Configuring connection limitation per WLAN
Version 5.2
page 300 of 533