WEC8500/8050 Operation Manual
4) Configuration of default-information METRIC-TYPE
Configure the OSPF metric-type (1/2) value.
WEC8500/configure/router/ospf 2# default-information originate metric-
type ?
1
2
WEC8500/configure/router/ospf 2# default-information originate metric-
type 1 ?
<cr>
5) Configuration of default-information ROUTE MAP
Enter the name of pointer to route-map entries.
WEC8500/configure/router/ospf 2# default-information originate route-
map ?
<WORD>
WEC8500/configure/router/ospf 2# default-information originate route-
map AA
WEC8500/configure/router/ospf 2#
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <OSPF> <General> menu in the sub-menus.
Click a PROCESS ID that user wants to configure. The OSPF configuration window is
shown below.
Use the value configured in 'Configuration using CLI' as a user-defined value in the below
screen.
Samsung Electronics America
Set OSPF External Type 1 metrics
Set OSPF External Type 2 metrics
Pointer to route-map entries
Version 5.2
page 73 of 533