Figure 70. Ap Add/Remove Window For Remote Ap Group - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <Remote AP
Groups> in the submenu, and then select a remote AP group to configure. Under the
'General' tab of the remote AP group, APs can be added or removed.
4.2.2.3 Local Authentication Configuration for Remote AP Group
Users (stations) accessing the remote AP and the Radius server which authenticates such
users can be configured.
Configuration using CLI
Perform the following commands to configure local authentication settings of the remote
AP group:
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create or delete a remote AP group. To delete a remote AP group, enter 'no' parameter
in front of the command

remote-ap-group [REMOTE_AP_GROUP_NAME]
Samsung Electronics America

Figure 70. AP Add/Remove Window for Remote AP Group

Version 5.2
page 157 of 533