WEC8500/8050 Operation Manual
Parameter
CHANNEL
4) To check the changed configuration, execute the following command.
show wi current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion> <Channel Validation> menu in the sub-menus. And then,
operator can configure the SERVICE STATE and Valid Channel List in the screen.
Operator can change configuration after changing the SERVICE STATE and Valid Channel
List and clicking Apply.
8.2.1.8
Configuring and Searching Black/White List
Operator can configure classification to distinguish authorized and unauthorized
APs/stations. The administrator configurable lists include <AP black-list, Station black-list,
Managed OUI, Managed/Neighbor AP>. The <Managed AP, Managed Station, Managed
SSID> are automatically configured and can be used only for search.
Configuration using CLI
1) Go to the configure wids configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wi
Samsung Electronics America
Figure 164. Configuration Window for Channel Validation
Description
Authorized channel number (e.g. add 2, 3, 4)
Version 5.2
page 336 of 533