WEC8500/8050 Operation Manual
5.1.3
WLAN-based ACL Configuration
To configure ACL to apply to the WLAN service, define IP-based ACL first and then
configure it to the WLAN.
Configuration using CLI
The procedures for configuration are as follows.
1) Before applying ACL, retrieve ACL that is configured as WLAN ACL.
WEC8500# show running-config network
fqm-mode
...
ip access-group wireless acl1
!
2) Go to configure wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
3) Among retrieved ACLs, enter an ACL name to apply to the WLAN with the 'acl'
command.
acl [ACL-NAME]
4) To check the configured ACL, use the 'show wlan detail' command.
Samsung Electronics America
Version 5.2
page 196 of 533