Figure 6. Optic Port Configuration - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual

Separate the electrical wiring of a switch or related devices and the electromagnetic
area of network data line

Cable or connector and safe connection without damaged cable sheath
Optic port
It provides two 10 GbE Optic ports and eight 1 GbE Optic ports and the operational status
of each port is displayed in LED.
1G port
LINK/ACT LED
Configuration item
10 GE ports
1 GE port
USB port (Host 2.0)
The WEC8500 provides a USB host port that supports the upgrade of WEC8500 operation
software.
A typical USB memory stick is supported.
Samsung Electronics America
The 1000 BASE-T standard does not support the forced mode.
The auto-negotiation function must be always used for 1000 BASE-T port or trunk
connection.
Connector

Figure 6. Optic port configuration

Port/LED
LINK/ACT 1, LINK/ACT 2
10G 1, 10G 2
LINK/ACT 1~LINK/ACT 8
1G 1~1G 8
1G port
LINK/ACT status of each port
- Turned on for link connection
- Blinking for data exchange
10 GbE Optic module connector
LINK/ACT status of each port
- Turned on for link connection
- Blinking for data exchange
1 GbE Optic module connector
10G port 10G port
LINK/ACT LED Connector
Description
page 25 of 533
Version 5.2