Management Interface Configuration - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
4.1.2

Management Interface Configuration

The APC can communicate with a W-EP wireless LAN AP using management interface.
This is one of the information that must be configured first of all for wireless LAN service.
Configuration using CLI
To configure management interface, execute the command as follows:
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Configure a management interface.

apc ap-mgmt-if [IP_ADDRESS]
Parameter
IP_ADDRESS
3) To check the configured IP information, use the 'show apc summary' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <General> menu in the sub-menus.
After entering a configuration in the AP Management of the window, click the <Apply>
button.
Samsung Electronics America
IP address of APC that is used for communication with a W-EP
wireless LAN AP
Figure 56. Management interface configuration
Description
Version 5.2
page 130 of 533