Figure 67. 802.11B/G/N Window For Ap Group - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
4.2.1.4 802.11b/g/n Configuration
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <AP Groups>
in the submenu, and then select an AP group to configure. Settings can be configured under
the '802.11b/g/n' tab of the AP group.
The configuration items are as follows:
[Service Configuration of AP Group]

SERVICE: Enable or disable the radio service.
[Channel Configuration]

CURRENT CHANNEL: Channel configuration (range: 1-14)

CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by automatic adjustment functions such as RRM. When the <Monitor>  <Access
Points>  <Radio>  <802.11b/g/n> menu is selected, the channel value is shown
as * (optional).
[TX Power Setting]

TX CURRENT POWER: TX power (range: 3-23)

TX POWER FIX: The configured TX power is configured as fixed and it is not
affected by automatic adjustment functions such as RRM. When the <Monitor> 
<Access Points>  <Radio>  <802.11b/g/n> menu is selected, the TxPower value
is shown as * (optional).
Samsung Electronics America

Figure 67. 802.11b/g/n Window for AP Group

To check the configured channel and TX power information, go to <Monitor> 
<Access Points>  <Radio>  <802.11b/g/n>.
Version 5.2
page 149 of 533