WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <General> menu in the sub-menus. To enable repeater service, configure
the INTERFACE GROUP in the Repeater Service of the window, select Enable in the
SERVICE, and click the <Apply> button.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP selection <General> menu in the sub-menus.
After selecting AP MODE item, click the <Apply> button and restart the AP.
Samsung Electronics America
Figure 100. Root service management (1)
Figure 101. Root service management (2)
Version 5.2
page 200 of 533