WEC8500/8050 Operation Manual
6.2.3
Configuring QoS Profile of a Specific Terminal
You can configure a QoS profile that is applied to a specific wireless terminal.
This QoS profile is applied from the RADIUS server of a wireless terminal during
authentication.
Configuration using CLI
1) Go to configure QoS profile configuration mode of CLI.
APC# configure terminal
APC/configure# qos <profile name>
APC/configure/qos Samsung #
2) Configure 802.1p and a DSCP value that will be used for each access category.
ac [AC] [802.1P_TAG] [DSCP_TAG]
Parameter
AC
802.1P_TAG
DSCP_TAG
3) Configure the brief information of a profile.
description [DESCRIPTION]
Parameter
DESCRIPTION
4) Configure maximum allowed 802.1p priority value used in the Traffic Identifier (TID)
field of AP QoS packet.
max-dot1p <802.1p tag>
Parameter
802.1P_TAG
5) To check the configured QoS profile information, use the 'show qos profile' command.
Samsung Electronics America
Access Category(AC_VO/AC_VI/AC_BE/AC_BK)
802.1p configuration (range: 0-7)
DSCP tag configuration (range: 0-63)
Profile description
Maximum allowed 802.1p configuration (range: 0-7)
Description
Description
Description
page 250 of 533
Version 5.2