WEC8500/8050 Operation Manual
8.3
Captive Portal
The W-EP wireless LAN system provides the Guest Access function. A guest user can
receive a limited service after connected to a specific WLAN (SSID) and going through
authentication.
8.3.1
WLAN Security Configuration
Configuration using CLI
To configure WLAN security for guest connection control, execute the command as follows:
1) Go to configure wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Disable the WLAN.
WEC8500/configure/wlan 1# no enable
3) Configure the WEB policy (default: disabled).
WEC8500/configure/wlan 1/security/layer3# web-policy
4) Enable the WEB authentication (default: disabled)
WEC8500/configure/wlan 1/security/layer3# web-policy authentication
5) Configure a guest flag (default: disabled).
WEC8500/configure/wlan 1# guest-flag
6) Enable the WLAN.
WEC8500/configure/wlan 1# enable
7) To check the configured environment, use the 'show wlan security summary' command.
Samsung Electronics America
Version 5.2
page 343 of 533