Figure 104. Initialization Of Wlan Security Function - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Security>  <L2> tab.
The configuration items available in the window are as follows.
PROFILE NAME
L2 SECURITY TYPE
WPA POLICY
WPA2 POLICY
AUTH KEY
MGMT
Samsung Electronics America

Figure 104. Initialization of WLAN security function

Item
A WLAN configuration name is displayed.
Layer2 security function type
- None: Security function disabled (Select this to initialize the
WLAN security function.)
- Static WEP: Static WEP security function
- 802.1x (Dynamic WEP): Dynamic WEP security function
- Static WEP + 802.1x (Dynamic WEP): Static/Dynamic WEP
security function
- WPA + WPA2: WPA/WPA2 PSK/802.1x security function
WPA WPA Version 1 function is enabled when selected
ENCRYPTION Encryption type
TYPE - TKIP: TKIP type
- CCMP: AES-CCMP type
- Both: TKIP, AES-CCMP type
WPA2 The WPA Version 2 function is always enabled and cannot be
changed.
ENCRYPTION The only supported encryption method is CCMP and this
TYPE cannot be changed.
- CCMP: AES-CCMP method
PSK/802.1x Authentication key management type
- PSK: PSK (shared key) authentication type
- 802.1x: 802.1x authentication type through a RADIUS
server
PSK FORMAT PSK key input type
- ASCII: ASCII character string
- HEX: Hexadecimal value
PSK KEY PSK key
- 8-63 ASCII character string
Description
page 205 of 533
Version 5.2