Figure 189. Ttacacs+ Server Configuration Window - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
9) You can view configuration information by using the 'show security tacacs server
config' and 'show security tacacs server detail [SERVER ID]' commands.
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, and then select
<Security>  <AAA>  <TACACS+> in the submenus.
If you click the <Add> button in the TACACS+ initial window, you can add a TACACS+
server.
The server addition window is shown below.
Item
INDEX (PRIORITY)
IP ADDRESS
SHARED SECRET
CONFIRM SHARED
SECRET
PORT NUMBER
RETRANSMIT
INTERVAL
RETRANSMIT COUNT
BEFORE FAILOVER
SOURCE IP ADDRESS
STATUS
Samsung Electronics America

Figure 189. TTACACS+ Server Configuration Window

ID that distinguishes TACACS+ server configurations
IP address of the TACACS+ server
Public key of the TACACS+ server
Re-enters the key for TACACS+ server communications for
confirmation
Communication port number of the TACACS+ server
(range: 1-65,535, default value: 49)
Retransmission interval for a TACACS+ message
(range: 1-5, default value: 2, unit: seconds)
Maximum message retransmission count before a TACACS+ server
failover is attempted (range: 0-3, default value: 2)
Source IP address of the TACACS+ message
- Note: it must be one of the IP addresses configured in the W-EP
wireless LAN system.
Status indicating whether packets are transferred to the TACACS+
server (default value: enable)
Description
Version 5.2
page 362 of 533