Managing Ap File Transmission - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
4.1.5

Managing AP File Transmission

It provides the configuration and transmission management function for the tech support
file of the AP.
4.1.5.1 Tech Support Information File
1) Go to configure  APC mode of CLI.
WEC8500# configure terminal
WEC8500/configure# apc
WEC8500/configure/apc#
2) Configure a file transmission method to collect the AP Tech support information.

tech-support [MODE]
Parameter
MODE
3) If AP debug information collection is failed, configure maximum number of retries.

tech-support max-retry [COUNT]
Parameter
COUNT
4) To check the configuration information, use the 'show ap tech-support' command.
4.1.6 APC Redundancy Configuration
An operator can add a backup APC to an AP to make the backup APC provide the service
even when an APC fault occurs.
The maximum number of backup APCs that can be registered to one AP per model is as
follows:
APC Model
WEC8500
WEC8050
If a fault occurs to the primary APC while an AP is connected to the primary APC, the AP
is connected to the secondary APC. If a fault also occurs to the secondary APC, the AP is
connected to the tertiary APC. For reference, the WEC8050 model does not support a
tertiary APC.
Samsung Electronics America
Selects file transmission method (ftp/sftp/http).
- tftp is not supported.
The maximum number of APC systems that can be registered
3 (Primary Server, Secondary Server, Tertiary Server)
2 (Primary Server, Secondary Server)
Description
Description
Number of retries.
Version 5.2
page 134 of 533