Figure 69. Remote Ap Group Add/Remove Window - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select the
<Remote AP Groups> menu in the sub-menus. Click the <Add> or <Delete> button to
add or delete a group.
4.2.2.2 AP Addition/Removal Configuration for Remote AP Group
To aid management of remote APs in groups, the APC allows addition/removal of APs
to/from AP groups.
Configuration using CLI
1) Go to configure mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create or delete a remote AP group. To delete a remote AP group, enter 'no' parameter
in front of the command

remote-ap-group [REMOTE_AP_GROUP_NAME]

no remote-ap-group [REMOTE_AP_GROUP_NAME]
3) Add or delete an AP to or from a remote AP group. To delete an AP from the remote
AP group, enter 'no' parameter in front of the command. The Region value of an AP
added to a remote AP group is automatically changed to Remote and it is automatically
re-connected to the APC. If an AP is deleted from a remote AP group, the Region value
is changed to Local and the AP is re-connected to the APC.

add-ap [AP_NAME]

no add-ap [AP_NAME]
4) Use the 'show remote-ap-group summary' command to check the AP group
information.
Samsung Electronics America

Figure 69. Remote AP Group Add/Remove Window

Version 5.2
page 156 of 533