Figure 163. Configuration Window For Unauthorized Station Detection Option - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
3) To check the changed configuration, use the following command.

show wi device client current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Policy>  <Static Rule> menu in the sub-menus. And then,
operator can change the setting by selecting <Station> at the upper tab and clicking Apply.
In the configuration screen, operator can check Option and click Apply for configuration.

Figure 163. Configuration Window for Unauthorized Station Detection Option

8.2.1.7 Unauthorized Channel Validation Configuration
The unauthorized channel validation function helps an operator detect an AP that uses an
unauthorized channel other than configured channels. The configuration procedure is as
follows:
Configuration using CLI
1) Go to configure  wi  channel-validation configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# channel-validation
2) Enable the unauthorized channel validation function.
WEC8500/configure/wi/channel-validation# enable
3) Configure an authorized channel.

add [CHANNEL]
Samsung Electronics America
Version 5.2
page 335 of 533