Wpa/Wpa2 802.1X Configuration - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
5.3.3

WPA/WPA2 802.1x Configuration

The WPA/WPA2 802.1x, one of wireless LAN authentication types does authentication
through an authentication server such as a Remote Authentication Dial-In User Service
(RADIUS) server.
To configure WPA/WPA2 802.1x to WLAN, execute the command as follows:
Configuration using CLI
1) Go to configure  wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
2) Go to security configuration mode and initialize the configuration.
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# setDefault
3) Configure the WPA type.
WEC8500/configure/wlan 1/security# wpa_type
Parameter
wpa_type
4) Configure the encryption type.
WEC8500/configure/wlan 1/security# [WPA_TYPE] [ENC_TYPE]
Parameter
WPA_TYPE
Samsung Electronics America
As the 802.1x authentication needs interoperation with a RADIUS server, the
RADIUS server required for the WLAN security configuration must be configured
first. For more information about RADIUS server configuration, see '8.1 RADIUS
Server Configuration'.
WPA type (wpa/wpa2): WPA Version 2 must be enabled at all times.
- wpa: WPA Version 1
- wpa2: WPA Version 2
WPA type (wpa/wpa2): Use the same value as the WPA type
configured before. WPA Version 2 must be enabled at all times.
- wpa: WPA Version 1
- wpa2: WPA Version 2
Description
Description
Version 5.2
page 209 of 533